For Product Inquiries and Availability, please contact your local Castle location.
- Plumbing and Bath
- Rough Plumbing
- Water Heaters
- Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Horizontal Bundle
Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Horizontal Bundle
Eccotemp Systems, LLC
This bundle includes the Eccotemp EL22i Indoor Natural Gas Tankless Water Heater and the 4" Horizontal Z-Vent Water Heater Vent Kit with Backflow Preventer.
The Eccotemp EL22i Natural Gas Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered front glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and gallons per minute flow rate. The Eccotemp EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the Eccotemp EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.
Product Features:
- CSA Certified for US and Canadian use
- Hot water capacity range: .8 - 6.8 GPM
- 45-degree rise: 6.8 GPM
- 50-degree rise: 5.0 GPM
- 70-degree rise: 3.4 GPM
- 110-volt UL Listed Power Cord
- Natural Gas-Powered
- 10 Year Warranty on Heat Exchanger
- 5 Year Warranty on Parts
- Activation Flow .8 GPM
- Maximum Flow Rate 6.8 GPM
- Energy Factor: 0.80
- Energy Rating: 82%
- Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
- Product Weight: 39.7 pounds (lbs)
- Actual Product Dimensions (LxWxD): 27"x14"x5.25"
The 4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit includes:
- (1) Termination Hood
- (1) 4" x 90 Degree Elbow
- (1) 4" x 1' Pipe
- (1) Wall Thimble
- (1) 4" Universal Appliance Adapter with Back Flow Preventer
You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.
The Eccotemp EL22i has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.
IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!
All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
-
Manufactured By:Eccotemp Systems, LLC -
UPC / Barcode:851293008965 -
Model Number:EL22i-NGH -
Regional Availability:AtlanticOntarioQuébecWest
Product Description
This bundle includes the Eccotemp EL22i Indoor Natural Gas Tankless Water Heater and the 4" Horizontal Z-Vent Water Heater Vent Kit with Backflow Preventer.
The Eccotemp EL22i Natural Gas Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered front glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and gallons per minute flow rate. The Eccotemp EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the Eccotemp EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.
Product Features:
- CSA Certified for US and Canadian use
- Hot water capacity range: .8 - 6.8 GPM
- 45-degree rise: 6.8 GPM
- 50-degree rise: 5.0 GPM
- 70-degree rise: 3.4 GPM
- 110-volt UL Listed Power Cord
- Natural Gas-Powered
- 10 Year Warranty on Heat Exchanger
- 5 Year Warranty on Parts
- Activation Flow .8 GPM
- Maximum Flow Rate 6.8 GPM
- Energy Factor: 0.80
- Energy Rating: 82%
- Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
- Product Weight: 39.7 pounds (lbs)
- Actual Product Dimensions (LxWxD): 27"x14"x5.25"
The 4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit includes:
- (1) Termination Hood
- (1) 4" x 90 Degree Elbow
- (1) 4" x 1' Pipe
- (1) Wall Thimble
- (1) 4" Universal Appliance Adapter with Back Flow Preventer
You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.
The Eccotemp EL22i has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.
IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!
All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
Product Specifications
- Manufacturer
- Eccotemp Systems, LLC
- Product Type
- Water Heaters
- Product UPC
- 851293008965
- Model Number
- EL22i-NGH
